The Mold-Man® 1050 Thermoplastic Machine is a Melt on Demand Molding™ table top model for thermoplastic materials such as copolyesters and polyamides. Includes touch screen controls, melt temperature up to to 260 °C (500 °F), 1 ton clamping force, and optional 2-hand control.
| Mold-Man® 1050TP |
| Precision flow and metering system |
| Light curtain and safety actuation |
| 1 Ton clamping force |
| Intuitive touch screen operation |
| Center core “On Demand” type reservoir |
| Emergency-stop button |
| Height | 838 mm / 33” |
| Width | 610 mm / 24” |
| Depth | 914 mm /36” |
| Weight | 170 kg /375 lbs |
| Voltage | 230 VAC, Single Phase, 50/60Hz, 30A |
| Air Pressure | 8 bar / 116 psi |
| Air Volume | 180 lpm / 6 SCFM |
| Clamp | Pneumatic |
| Clamping Force | 9.96 kN / 1 ton (upgradeable to 19.92 kN / 2 ton) |
| Clamp Stroke | 150 mm / 5.9” |
| Ejector | Pneumatic |
| Ejector Force | 1535 N / 345 lbf |
| Ejector Stroke | 10 mm / 0.4” |
| Mold-set Dimension | 200 mm x 150 mm / 7.8” x 5.9” |
| Mold Height | 100 mm / 3.9” minimum |
| Shot Size | 0.5-50 g / 0.02-1.76 oz* |
| Mold Platen Cooling | Yes |
| Melt Reservoir | 1.8 kg / 4 lbs |
| Melt Temperature | Up to 260° C / 500 °F |
| Melt Capacity | 2.7 kg/h / 6 lbs/h (upgradeable to 3.1 kg/h) |
| Pump Motor | 400 W / .5 HP |
| Injection Pressure | 1-30 bar / 15-450 psi |
| Operator Display | Touch screen, micro processor controlled |
| Melt Temperature | Up to 260 °C / 500 °F |
MoldMan Systems™ Product Demonstration – Mold-Man® 1050 Tabletop Machine
The Mold-Man® 1050 is compatible with low-pressure materials including polyamides, polyamide-acrylic hybrids, and copolyesters. Finished products are ready to handle and test in seconds.
